HKS EVC - Page 39

−38−
６．FunctionSettingGroup
Selectthedatatobedisplayedinthebargraphwhileinthestandardmode.
(１)Pressthevolumeknobinthebargraphfunctionset
mode.
・Thedigitaldisplay(S)willilluminate[ ].
・TheEVCwillbeepandthedigitaldisplay(L)Blinks
・"ＳＥＬ"willilluminate.
６．１．BarGraphFunctionSetMode
(２)Turnthevolumeknobtoselectthedatafunctionto
bedisplayed.Pressvolumeknobtocompletesetting.
・Selectfromthefollowing5datafunctions:
ｂＳＴ /ｂＳＴ/ＳＰｄ/ＲＥＶ/ＴＨＲ
・ThedefaultsettingisｂＳＴ.
Note
・
ｂＳＴ:BoostDisplayＡ‑Bargraphdisplayrangeisbetween‑100to250kPAor
‑14.0to36.0PSI.
・ｂＳＴ:BoostDisplayＢ‑Bargraphdisplayrangeisbetween‑100to250kPAor
‑14.0to36.0PSI.
・ＳＰｄ:SpeedDisplay‑Bargraphdisplayisbetween0to50x10km/h.
・ＲＥＶ:EngineRPMDisplay‑Bargraphdisplayrangeisbetween0to120x100rpm.
・ＴＨＲ:Throttle%OpeningDisplay‑Bargraphdisplayrangeisbetween0to100%.
Setthemaximumvalueofthebargraphinthestandardmode.
(１)Pressthevolumeknobinthebargraphmaxvalueset
mode.
・Thedigitaldisplay(S)willilluminate[ ].
・TheEVCwillbeepandthedigitaldisplay(L)Blinks
・"ＳＥＴ"willilluminate.
６．２．BarGraphMaximumValueSetMode
(２)Turnvolumeknobandselectthemaxvaluetobe
displayedonthebargraph.Whenselectionisdone,
pressthevolumeknobagain.
・TheimageontheleftrepresentstheｂＳＴsetting
with160kPaselected.
www.R33-GTR.org