Safety 6 (124)
2 Safety
2.1 Intended Use
The intended use of this equipment is as a communication interface and gateway.
The equipment receives and transmits data on various physical layers and connection types.
If this equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
2.2 General Safety
Caution
Ensure that the power supply is turned off before connecting it to the equipment.
Caution
This equipment contains parts that can be damaged by electrostatic discharge (ESD). Use
ESD prevention measures to avoid damage.
Caution
To avoid system damage, the equipment should be connected to ground.
Using the wrong type of power supply can damage the equipment. Ensure that the power
supply is connected properly and of the recommended type.
Anybus
®
Communicator
™
User Manual
SCM-1202-152 1.10 en-US
To Next Page
