HMS Networks Intesis AC Cloud Control - Resetting Wi-Fi Settings

Device Configuration 1.0
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
7 / 24
2.1 Reset Wi-Fi settings
To reset the Wi-Fi information in an AC Cloud Control device is needed to hold the button for
10 seconds (See Figure 2.4), the light of the LED will blink in green after some seconds it will
turn steady green (See Figure 2.5).
Figure 2.4 Reset Wi-Fi procedure.
Figure 2.5 Reset LED feedback.
Green
Blinking
Green
Steady
<10 sec
10 sec