© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
3.4 Manual
Tap on Manual (See Figure 3.9)
Figure 3.9 Manual configuration procedure.
• In case to select the security open, type the SSID of the Wi-Fi network wanted. (See
Figure 3.10). Tap on Connect.
Figure 3.10 Security Open.
If the configuration network has been carried out successfully the light of the LED will follow
a light sequence (See Figure 3.5). Tap on Done.
In case the light of the LED does not follow the sequence or start lighting different, start the
process from the beginning.
To Next Page
Loading...