– 11 –
UNLOADING
1. Lift the lift handle slowly to lower the bowl support. Unlock the bowl and swing-out slightly.
2. Open the wire cage assembly.
3. Remove the agitator from the agitator shaft.
4. Remove the bowl from the bowl support.
WIRE CAGE (Fig. 5)
The bowl guard wire cage can be rotated out of the way to add ingredients or to access the bowl and
agitator.
Note how the plastic carriers allow the wire cage to ride around the circumference of the planetary drip
cup.
• Open the bowl guard wire cage: rotate it to your left.
• Close the bowl guard wire cage: rotate it to your right until it stops, closed position.
NOTE: The bowl guard wire cage must be returned to the closed position for the mixer to operate.
Fig. 5
HL400 Technical Manual Page 19 of 80
To Next Page
Loading...
Need help?
General
