EasyManuals Logo

Hobart HL400 User Manual

Hobart HL400
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
– 13 –
CLEANING
Disconnect the electrical power to the machine and follow lockout / tagout
procedures.
New mixer bowls and accessories (beaters, whips and dough arms) should be thoroughly washed with hot
water and a mild soap solution, rinsed with either a mild soda or vinegar solution and thoroughly rinsed with
clear water before being used. This cleaning procedure should also be followed for bowls and agitators
before whipping egg whites or whole eggs.
The mixer should be thoroughly cleaned daily. DO NOT use a hose to clean the mixer; it should be washed
with a clean, damp cloth. The base allows ample room for cleaning under the mixer.
The drip cup (Fig. 2, page 6) should be removed (which is secured with 3 screws) periodically and wiped
clean.
For cleaning the Wire Cage refer to page 12.
HL400 Technical Manual Page 21 of 80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobart HL400 and is the answer not in the manual?

Hobart HL400 Specifications

General IconGeneral
BrandHobart
ModelHL400
CategoryMixer
LanguageEnglish

Related product manuals