Hobby Siesta - Page 121

7. Electrical Installations120
Operation via ancillary battery
•Onlyaccumulatorbatterieswithboundelectrolytes(gel
batteries)maybeinstalledinthosepositionsspecied
by the manufacturer.
•Theinstalledgelbatterymaynotbeopened.
•Whenchangingancillarybatteries,useonlybatteriesof
thesamemakeandcapacity.(Settingthebatterytype
onthecontrolpanel:seep.97)
•Beforedisconnectingorconnectingtheauxiliarybattery,
switchothemotor,230Vsupply,12Vsupplyaswellas
all electrical devices.
•Beforereplacingfusesyoumustrstde-energisethe
charger.
•Beforereplacingablownfuseyoumustrstxwhatever
caused the fuse to blow.
•Fusesmayonlybereplacedbyfuseswiththesamefuse
protectionvalue.
•Airingthechargerinsucientlywillreducethecharge
current.
•Thesurfaceofthechargercasingmaybecomehotwhen
thedeviceisinoperation.
Position of the 95 Ah AGM ancillary battery
Theancillarybatteryismountedinthefrontpassenger
console.Thefootofthebatteryisattachedtoabaseplate.
Thepassengerseatincludingtherotatingassemblymustbe
dismantledinordertosubsequentlytorchangethebatteries.
Vehicle's electric system underneath the passenger seat
Inallvehicles,theoptionaladditionalbatteryismounted
onabaseplateinthedriver'sconsole.