U
I
t
T
R
:
:
:
:
:
14,2 V
7,2 A
1,3 h
26,0°C
1
U
I
t
T
R
:
:
:
:
:
14,2 V
7,2 A
1,3 h
26,0°C
1
U
I
t
T
R
:
:
:
:
:
13,5 V
3,6 A
0,0 h
21,0°C
1
Ifthebatteryisoverheated,itcannotbecharged.Should
thiswarningoccurrepeatedly,thecampermustbetaken
toanauthorisedspecialist.
The value “R” shows the calibration check. If “1” is output,
thesensorwillbecalibrated(targetstate).If“0”isoutput,the
measured values may deviate slightly and the sensor should
be recalibrated.
Normally, calibration is carried out automatically, whereby
neither the charging nor the discharge current may be more
than150mA.
The system can be calibrated manually if no electrical devices
havebeenswitchedonin12Voperation.
“U” indicates the current charging voltage, “I” the current
charging current and the remaining time until the battery is
dischargedisdisplayedinhours.Thevalue“T”indicatesthe
temperatureofthebattery;thismustnotexceed50°C.Awar-
ningmessagewillbesentifthetemperatureexceeds50°C
and the battery will be shown in red in the main menu on the
controlpanel.
Battery management
Thecurrentstatusoftheauxiliarybatteryisdisplayedinthe
batterymenu(self-sucientpackage).
-Bat.1= ancillarybattery
-Bat.Mot.=vehicle'sbattery(starterbattery)
-Bat.2= additionalbattery*(displayedonlyifthemobile
homehasbeenequippedwithanadditional
battery)
Thechargingstatusisshowninthebatteryicon;theexample
shows a fully charged battery.
To Next Page
Loading...
