Hohem iSteady MT2 - Page 15

3. Balancing the Pan Axis
① Hold and tilt the
handle slightly
② Unlock the pan
motor lock switch
③ Check the camera's
center of gravity.
④ Unlock the pan axis
arm latch
⑤ Push the pan axis to move left or right until the
camera can stay still in any position.
⑥ Lock the
pan axis arm
latch
*After balancing iSteady MT2, if you need adjust the motor torque for proper using.
please see the description in the chapter "How to Use the Gimbal".
12