TLi
IQ
System User Manual 4 − 8
Section 4 − Software Functions - Detailed Descriptions
If the patient sample is not added and ENTER not pressed within allotted
time, the test process cannot continue. This message will be displayed.
Press ESC to return to the Main Menu. No record of the test will be held
in memory.
Once the sample is added, the analyzer will begin a 20-minute
incubation countdown. To abort the test, press ESC. Pressing ESC will
terminate the test and the data will be lost.
Upon completion of the incubation period, the analyzer will begin the
analysis of the cassette. Do not disturb the analyzer until the results are
displayed. The analysis will take approximately 2 - 3 minutes.
To Next Page
Loading...