Hologic TLi IQ - Incubation Mode

To Next Page

To Previous Page

TLi

System User Manual 4 − 28

Section 4 − Software Functions - Detailed Descriptions

CHANGE SETUP – INCUBATION MODE

Option 6 on the Main Menu screen allows the user to change the

Date/Time, Autoprint, or INCUBATION MODE, or to perform QCette

Setup from the SETUP MENU.

Select option 3 on the SETUP MENU to change INCUBATION MODE.

In the Internal Mode, the analyzer times the incubation and starts the

analysis. External Mode requires the user to manually time the

incubation and start the analysis.

The current setting will be flashing. Select 1-INTERNAL or 2-

EXTERNAL. Press ENTER to accept and return to the SETUP MENU.

INCUBATION MODE

1-INTERNAL

2-EXTERNAL

ENTER-ACCEPT

SETUP MENU

1-DATE/TIME

2-AUTOPRINT

3-INCUBATION MODE ↓

fFN MAIN MENU

4-ACCESS DATA

5-VIEW SETUP

6-CHANGE SETUP ↑↓