TLi
IQ
System User Manual 4 − 14
Section 4 − Software Functions - Detailed Descriptions
LIQUID CONTROLS (Internal Incubation Mode)
Option 8 on the Main Menu screen allows the user to run the LIQUID
CONTROLS.
The most recent USER ID is always displayed. Press ENTER to accept
the ID, or enter a new User ID. This field will accept 15 alpha or numeric
characters. To leave this field blank, delete the information using the ←
key.
The CASSETTE LOT# must be entered to proceed to the next step. For
convenience, the last 2 numbers only can be entered if the lot has not
changed. The CASSETTE LOT# is located on the cassette pouch. The
software requires that the lot number is entered in the correct format: one
alpha character followed by four numeric characters (e.g., L1002).
To Next Page
Loading...