TLi
IQ
System User Manual 4 − 13
Section 4 − Software Functions - Detailed Descriptions
TEST WARNING: This message will be displayed if ESC was pressed
during testing. Lines 1 and 2 will flash prompting the user to select
ENTER to continue test, or ESC to end test. This message will hold for
5 seconds and then revert back to its respective screen.
QCette Data Record – This record will be displayed on two screens.
Each screen can be accessed by using the ← and → keys. The
complete record will be printed automatically if AUTOPRINT is set to ON,
or it may be printed/reprinted by pressing the PRINT/ENTER key.
QCette results are SYSTEM PASS, SYSTEM FAIL, or INVALID.
A FAIL or INVALID result should be repeated. (See Section 7, Items 9
and 10.)
Invalid results will not be stored in memory.
To Next Page
Loading...