TLi
IQ
System User Manual 4 − 3
Section 4 − Software Functions - Detailed Descriptions
SET CALIBRATION
Option 2 on the Main Menu screen allows the user to set the calibration
on the analyzer. Follow the analyzer prompts. Calibration must be set
when changing cassette lots.
NOTE: If the calibration has not been set, menu option 2 will flash.
Calibration must be set before the analyzer can be used for testing.
The most recent USER ID is always displayed. Press ENTER to accept
the ID, or enter a new User ID. This field will accept 15 alpha or numeric
characters. To leave this field blank, delete the information using the ←
key.
To Next Page
Loading...