Hologic TLi IQ - Page 94

TLi
IQ
System User Manual 7 – 2
Section 7 – Troubleshooting
ITEM
PROBLEM
SOURCE
SOLUTION
3
Analysis process is
interrupted and/or
unusual characters
appear on display
screen, and the
analyzer does not
respond to keypad
inputs.
Electrostatic Discharge
Turn analyzer off and back on to reinitialize the system.
Proceed with testing.
4
Printer fails to print.
Printer Power Cord
ON/OFF Button
Printer Cable
Printer Labels
Ensure printer power cord is firmly connected to printer.
Ensure printer power cord is plugged into a grounded AC
electrical outlet.
Ensure green light is lit. This indicates printer is on.
Ensure printer cable is connected to the printer and the
analyzer.
Ensure printer is not out of printer labels. To order printer
labels, contact Hologic Inc.