Holtkamp UNO Series - Electrical Connection

Holtkamp Electronics UNO 7600XL engl. techn. Stand 04.2016 4050_04.2016 V09.2019
- 10 -
8.4 Electrical connection
The electrical connection can only be carried out by
 authorizedandqualiedpersonnel!
TheelectricalconnectionhastobecarriedoutbythelocalVDE
regulations.Withapermanentconnection,anallpolemainsse-
parator with at least 3 mm contact gap must be used. Before
startingtheelectricthecorrespondingcircuitmustbedisconnec-
ted.
Shut down the mains input by activating the separator switch,
removethefuseorreleasethemainsafetyfuse.Mainsandlow
voltagecablemustbespacedapart.Lowvoltagecablesshould
be generally spaced as screened cables.

Control cable and remote start connection have to be
kept away from each other!

UNO 7600/XL
UNO 7600/XL