HOLUX Wireless GPS Logger M-241 User’s Manual
12
7. Basic Operations
Before you use
1. If the user wants to use M-241 to record the coordinate for matching the
GPS coordinate of the picture in the camera, because the integration of
the two parties is performed under the comparison of the time, it is
recommended for the user to adjust the clock time in the camera to
match the GPS time in the M-241.
2. M-241 does not have the water-proof feature; please pay attention to
the moisture while using it in a rainy day.
3. Before turning off, please press “stop” button to prevent log data
damaged when in logging mode.
4. Before changing a new battery,please turn off power first.
Button Definition
MENU Button
MENU ButtonMENU Button
MENU Button -> Change & Select function.
ENTER Button
ENTER ButtonENTER Button
ENTER Button -> Confirm your select.
Except during the Setting Mode, user may press the “MENU” key
and “ENTER” key at the same time, all keys function will “LOCK”,
and press the “MENU” key and “ENTER” key at the same time again,
to cancel the “LOCK” status.
* LCD screen will show the reference button function.
How to select a mode
1. Turn on the power switch. The device will turn on and show the Track
Log Mode on the LCD.
2. There are 6 operational modes on this device. Please use the
MENU Button to change operation mode.
(
( (
( Track Log Mode
Track Log ModeTrack Log Mode
Track Log Mode
-
--
->
> >
>
Time Mode
Time ModeTime Mode
Time Mode
-
--
->
> >
> Show Position Mode
Show Position ModeShow Position Mode
Show Position Mode
-
--
->
> >
> Show Speed & Altitude
Show Speed & Altitude Show Speed & Altitude
Show Speed & Altitude
To Next Page
Loading...
Need help?
General
