Holux M-241 User Manual

HOLUX Wireless GPS Logger M-241 User’s Manual
24
8. Connecting the device to the PC
M-241 support 2 kinds of connection to PC, through USB cable
or Bluetooth.
Install USB driver
Install USB driverInstall USB driver
Install USB driver
COM Port
COM PortCOM Port
COM Port
1. Power On the device.
2. Connect the device to a computer
with the USB cable provided in the
package.
3. Install the USB driver
“CP210x_VCP_Win2K_XP.exe
CP210x_VCP_Win2K_XP.exeCP210x_VCP_Win2K_XP.exe
CP210x_VCP_Win2K_XP.exe ”
””
”
from the CD provided in the
package.
4. Click <Start> menu, select →
<Setting>, then enter→
<Controller> and select <System>
Select <Device Manager> Find the
< Connector (COM & LPT)> and
check the “ CP210xUSB to UART
Bridge Controller
” message.
Please note that the virtual COM port
number might be different on every
computer. Before using navigation
software, please confirm the COM Port
numbers created by your computer and
provided to your navigation software.

Holux M-241 Specifications

General

Brand	Holux
Model	M-241
Category	GPS
Language	English