Holux M-241 User Manual

HOLUX Wireless GPS Logger M-241 User’s Manual
42
5. Connect to “Serial port” or “SPP
Slave”, then tap “Finish”
6. Go to the “COM ports” panel to tap
“New Outgoing Port”, choose
“HOLUX_M-241” device and tap
“Next”.
7. Select the COM port, then tap finish,
it will show as a figure on the right,
and tap “OK” to finish the Bluetooth
set up. “Secure Connection” is not
recommended as it may cause an
unstable connection.
8. Now you can enable your navigation
map program to enjoy the GPS
function.
→

Holux M-241 Specifications

General

Brand	Holux
Model	M-241
Category	GPS
Language	English