Holzmann D 460FXL - User Manual

Questions and Answers

S
Sandra MillerAug 2, 2025
Why is my Holzmann D 460FXL vibrating so much?
- D
  Dr. David BrownAug 2, 2025
  Strong vibrations in your Holzmann Lathe can stem from several causes: * The workpiece may be warped, in which case you should change the material. * The workpiece might not be correctly centered; measure and correct the center. * A pulley could be loose; tighten it. * The pulley might be worn out, requiring replacement. * The lathe might be on an uneven surface; level the surface. * The tail- or headstock might be loose; tighten them. * The speed could be too high; adjust the speed accordingly.
D
Doris MillerAug 11, 2025
What to do if my Holzmann Lathe does not start?
- K
  Kevin BrownAug 11, 2025
  If your Holzmann Lathe fails to start, the issue might be due to: * A defective switch, which requires repair. * The power supply being off, necessitating power supply repair. * A defective fuse; replace it. * An activated circuit breaker; push the circuit button.
M
Melissa WillisAug 22, 2025
How to fix bad turning results on Holzmann D 460FXL Lathe?
- P
  Paul McguireAug 22, 2025
  If you're experiencing poor turning results with your Holzmann Lathe, consider these potential causes: * The chisel may not be sharp enough; sharpen the chisel. * You might be using the wrong chisel for the task; select the appropriate chisel. * The tool rest might be improperly adjusted; adjust the height and distance of the tool rest.

Summary

Preface and Support Information

Security Instructions

Read and obey all security instructions for safe operation of the machine.

Product Receipt and Inspection

Check product contents for transport damage or missing parts immediately after receipt.

Customer Service Contact Information

Contact details for Holzmann Maschinen GmbH customer support.

Technical Specifications and Components

Machine Components Overview

Identification and labeling of the machine's main components.

Detailed Technical Specifications

Provides detailed technical data for the Wood Turning Lathe D 460 FXL.

Scope of Delivery

Lists the parts and accessories included with the machine purchase.

Safety Guidelines

Proper Usage and Disclaimer

Defines proper machine usage and HOLZMANN's disclaimer for misuse.

Prohibited Actions and Modifications

Lists forbidden operations, removal of safety devices, and machine modifications.

General Safety Instructions

Covers lighting, operation conditions, personnel, clothing, and pre-maintenance safety.

Assembly and Electrical Connection

Preparation for Assembly

Steps to prepare the workplace and secure the machine for assembly.

Electrical Connection

Instructions for safely connecting the machine to the power supply.

Operation Guide

Pre-Operation Checks

Checks to perform before operating the machine, including part fit and workpiece security.

Speed Selection and Adjustment

Guidance on adjusting and selecting appropriate spindle speeds for different tasks.

Operating the Machine

Steps for operating the wood turning lathe, including tool placement and speed adjustments.

Maintenance Procedures

Lubrication Procedure

Instructions for cleaning and lubricating moving parts for longevity.

Drive Belt Inspection

Procedure for checking the status of drive belts and pulleys for wear.

Drive Belt Replacement

Detailed Steps for Belt Change

Step-by-step guide for replacing the drive belt on the D 460FXL model.

Troubleshooting and Disposal

Cleaning Procedures

Guidelines for cleaning plastic and machine parts to prevent corrosion.

Disposal Guidelines

Instructions for the proper and environmentally friendly disposal of the machine.

Machine Does Not Start Troubleshooting

Addresses issues when the machine fails to start, focusing on power supply problems.

Machine Stops During Work Troubleshooting

Diagnoses reasons for the machine stopping during operation, like motor overload or tool issues.

Electrical Diagram and Spare Parts Ordering

Electrical Wiring Diagram

Provides the electrical schematic and wiring diagram for the machine.

Ordering Spare Parts

Instructions and important notes on how to order spare parts for the machine.

Machine Parts Identification

Exploded View of Machine Parts

An exploded diagram illustrating all machine components for identification.

Spare Part List

Spare Part List Details

A comprehensive list of all machine parts with their corresponding numbers and quantities.

Declaration of Conformity

Warranty Information

Warranty Declaration

Details the warranty terms, coverage, and conditions for the machine.

Guarantee Terms and Service

Guarantee Terms and Conditions

Details the voluntary guarantee provided by HOLZMANN-MASCHINEN.

Post-Guarantee Service

Information on obtaining maintenance and repair services after the warranty expires.

Service Request Form

Product Experience Feedback

Holzmann D 460FXL Specifications

General

Brand	Holzmann
Model	D 460FXL
Category	Lathe
Language	English

Related product manuals