EC Declaration of Conformity
FKS 315-2000 E | Version 1.11 33
According to Machinery Directive 2006/42/EC Annex II 1.A
Manufacturer / Distributor: Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
hereby declares that the following product
Product group: Holzstar
®
Woodworking machines
Type of machine: Panel saw
Designation of the machine: FKS 315-2000 E
Item number: 5900317
Serial number*: ___________________
Year of manufacture*: 20____
* please fill in according to the information on the type plate
complies with all relevant provisions of the above-mentioned Directive as well as the other applicable Directives
(hereafter), including any changes in force at the time of declaration.
Relevant EU Directives: 2014/30/EU EMC - Directive
2012/19/EU WEEE- Directive
The following harmonised standards have been applied:
DIN EN ISO 12100:2011-03 Safety of machinery - General principles for design - Risk assessment
and risk reduction (ISO 12100:2010)
DIN EN 60204-1:2007-06 Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
DIN EN 1870-1:2009-08 Safety of woodworking machines - Circular sawing machines -
Part 1: Circular saw benches (with and without sliding table),
dimension saws and building site saws
Responsible for documentation: Kilian Stürmer, Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt
Hallstadt, 12.10.2020
______________________
Kilian Stürmer
Manager
14 EC Declaration of Conformity
To Next Page
Loading...
