Homematic IP HmIP-FROLL User Manual

30
Start-up
Please note! Only to be installed by persons with
the relevant electro-technical knowledge and
experience!*
Incorrect installation can put
• your own life at risk;
• and the lives of other users of the electrical system.
Incorrect installation also means that you are running the
risk of serious damage to property, e.g. because of a fire.
You may be personally liable in the event of injuries or
damage to property.
Contact an electrical installer!
*Specialist knowledge required for installation:
The following specialist knowledge is particularly important during
installation:
• The “5 safety rules” to be used:
Disconnect from mains; Safeguard from switching on
again; Check that system is deenergised; Earth and short
circuit; Cover or cordon o neighbouring live parts;
• Select suitable tool, measuring equipment and, if neces-
sary, personal safety equipment;
• Evaluation of measuring results;
• Selection of electrical installation material for safeguard-
ing shut-o conditions;
• IP protection types;
• Installation of electrical installation material;
• Type of supply network (TN system, IT system, TT sys-
tem) and the resulting connecting conditions (classical
zero balancing, protective earthing, required additional
measures etc.).

Homematic IP HmIP-FROLL Specifications

General

Operating temperature (T-T)	-10 - 55 °C
Frequency	868.6 MHz
Product type	Transmitter
Certification	CE
Product color	White
Maximum outdoor range	180 m
International Protection (IP) code	IP20
Current	2.2 A
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	41 mm
Width	54 mm
Height	33 mm
Weight	40 g
Package depth	112 mm
Package width	122 mm
Package height	48 mm
Package weight	121.2 g