42
Technical specifications
11 Technical specifications
Device short description:
HmIP-FROLL
Supply voltage: 230 V/50 Hz
Current consumption: 2.2 A max.
Power consumption in standby: 0.2 W
Max. switching capacity: 500 VA
Load type: motor load
Relay: 1x NO contact, 1x change-
over contact
Cable type and cross section:
rigid and flexible cable,
0.75-1.5 mm²
Installation: only in switch boxes (device
boxes) in accordance with
DIN 49073-1 or junction
boxes (surface-mounting
boxes) in accordance with
DIN 60670-1
Degree of protection: IP20
Protection class: II
Ambient temperature: -10 to +55 °C
Dimensions (W x H x D): 54 x 33 x 41 mm
Weight: 40 g
Radio frequency band: 868.0-868.6 MHz
869.4-868.65 MHz
Maximum radiated power: 10 dBm
Receiver category: SRD category 2
Typ. open area RF range: 180 m
Duty cycle: < 1 % per h/< 10 % per h
To Next Page
Loading...
