29
Technical specifications
12 Technical specifications
Device short description: HmIPW-DRBL4
Supply voltage: 24 VDC, +-5 %, SELV
Current consumption: 100 mA max./2.5 mA (typically)
Standby power
consumption: 60 mW
Load type: motor load
M
Relay: changeover contact, µ contact
Switching voltage: 230 V~
Current carrying capacity (channel): 2.2 A
Power loss of the device
for thermal calculation: 2.8 W max.
Cable type and cross section: rigid and flexible cable, 0.75-2.5 mm²
Installation: mounting rail (DIN rail) according to
EN 60715
Degree of protection: IP20
Ambient temperature: -5 to +40 °C
Dimensions (W x H x D): 72 x 90 x 69 mm (4 WM width)
Weight: 230 g
Subject to technical changes.
To Next Page
Loading...
Need help?
General
