6. STARTING THE ENGINE
Emergency Starting
ENGINE COVER
LATCHES
If the recoil starter and electric starting
system will not start the engine the
engine can be started by using the
emergency starter rope from the tool kit.
1. Release the engine cover latch then
remove the engine cover.
6 Y 22 mm HOLTS
..I. r..r.,
,
WditiERS FLYWHEEL &%‘ER
(Electric starter type)
2. Remove the four 6 x 22 mm bolts
and the four washers then remove
the flywheel cover.
Do not lose the washers.
NEUTRAL START
6x22mm
CABLE
(Recoil starter type)
3. Move the gearshift lever to F
(forward) position.
Loosen the neutral start cable lock
nut and disconnect the neutral start
cable.
4. Remove the four 6 x 22 mm flange
bolts and recoil starter assembly.
To Next Page
Loading...
