EasyManua.ls Logo

Honda BF25A - Over-Rev Limiter; Anode

Honda BF25A
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. OPERATION (MOTOR PROTECTION SYSTEM)
Over-Rev Limiter
This outboard motor is equipped with
an engine over-rev limiter which
activates when the engine speed
increases excessively. The over-rev
limiter can be activated while cruising,
or when ventilation occurs during a
sharp turn.
When the over-rev limiter is activated:
1. Reduce the throttle opening immedi-
ately and check the motor angle.
2. If the motor angle is correct but the
over-rev limiter stays activated, stop
the engine and check the condition
of the outboard motor and check the
propeller for damage. Correct or
service as necessary.
Anode
E (trim tab)
The anode is a sacrificial material
which helps to protect the outboard
motor from corrosion.
-1 Painting or coating the
anode will lead to rust and corrosion
damage to the outboard motor.
There is a small sacrificial anode in the
water passages of the engine block.
61

Table of Contents

Related product manuals