11. MAINTENANCE
Replacement Parts
The emission control systems on your
Honda engine were designed, built, and
certified to conform with EPA and
California emission regulations. We
recommend the use of genuine Honda
parts whenever you have maintenance
done.
These original-design replacement parts
are manufactured to the same standards
as the original parts, so you can be
confident of their performance.
The use of replacement parts that are not
of the original design and quality may
impair the effectiveness of your emis-
sion control system.
A manufacturer of an aftermarket part
assumes the responsibility that the part
will not adversely affect emission
performance.
The manufacturer or rebuilder of the part
must certify that use of the part will not
result in a failure of the engine to
comply with emission regulations.
72
Maintenance
Follow the maintenance schedule on
page 74. Remember that this schedule is
based on the assumption that your
machine will be used for its designed
purpose. Sustained high-load or high-
temperature operation, will require more
frequent service.
To Next Page
Loading...
