2.1 US qt (2.0 )
2.1 US qt (2.0
)
65
SERVICING YOUR OUTBOARD MOTOR
DRAIN
BOLT
SEALING WASHER
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground or pour it down a
drain.
Remove the engine oil drain bolt
and washer.
Allow the used oil to drain
completely, then install a new
sealing washer on the engine oil
drain bolt, and tighten it securely.
Reinstall the drain plug cover.
With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p. )
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
With oil filter change:
Install the oil filler cap and tighten
it securely.
Install and lock the engine cover.4.
5.
6.
7.
8.
9.
63
05/02/22 10:54:57 31ZW3600_066
To Next Page
Loading...
