18)Apply ATF to a new O-ring, and install it on the bot-
tom piece.
19)Hold the valve body in a vise with shop towel or
soft
jaws as shown
CAUTION:
Take care not to tighten the vise too tight as it
damages the valve body.
20)Loosen the manual valve 3 turns or more and pour
the fresh ATF into the cylinder chamber up
to
the top
edge
of
the valve body.
21 Install the cylinder piston assembly
to
the valve body.
22)Apply ATF
to
new O-rings and install them on the
23)Pour the fresh ATF into the cylinder chamber of the
24)
Install the outer tube guide loosely.
outer tube guide.
valve body up to the top edge of the valve body.
[1
I
CYLINDEWPISTON ASSY.
PI
O-RING
;7"
3.5
x 41.7 mm
I
11
1
O-RING
[21
OUTER TUBE
GUIDE
/
2.4x41.2 mm
[31
141
O-RING
2.0
x
45.5 mm
O-RING
2.0 x 49.5 mm
II
13-22
To Next Page
Loading...
