○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
41
MAINTENANCE SCHEDULE
SERVICING YOUR OUTBOARD MOTOR
Distributor’s Limited Warranty
ITEM
Perform at every indicated month or
operating hour interval, whichever
comes first.
REGULAR SERVICE PERIOD
After use
Engine oil
Gear case oil
Starter rope
Carburetor linkage
Valve clearance
Spark plug
Propeller and cotter pin
Anode
Idling speed
Lubrication
Each use
First month
or
20 hrs.
(2)
(2)
(1)
Every 6 months
or
100 hrs.
(2)
(2)
(1)
Every year
or
200 hrs.
(2)
Check level
Change
Change
Check
Check-adjust
Check-adjust
Check-adjust/Replace
Check
Check
Check-adjust
Grease
(3)
Follow the MAINTENANCE SCHEDULE table and service your outboard motor accordingly. Please note, a claim for
warranty coverage will not be denied simply because the maintenance schedule for your outboard motor was not
followed. However, any part(s) that fails specifically due to lack of maintenance, or improperly performed maintenance,
would not be covered under the .
Lubricate more frequently when used in salt water.
These items should be serviced by an authorized Honda Marine dealer, unless you have the proper tools and are mechanically proficient.
Refer to the Honda shop manual for service procedures.
For professional commercial use, log hours of operation to determine proper maintenance intervals.
(1)
(2)
(3)
11/03/07 16:33:50 31ZV1660_042
To Next Page
Loading...
