Honda BF6A - Fuel Filler Cap Vent Knob; Clamp Screws; Fuel Inlet Cap and Fuel Inlet (BF5 D and BF6 A)

23
CONTROLS
Fuel Filler Cap Vent Knob
(Internal Fuel Tank)
The fuel filler cap vent knob shuts off
the fuel tank from the open air.
Before operating the outboard motor,
turn the fuel filler cap vent knob 2 or
3 turns counterclockwise to open the
vent.
When refilling the fuel tank, turn the
fuel filler cap vent knob
counterclockwise to open and remove
the fuel filler cap.
Turn the fuel filler cap vent knob
clockwise and close it securely before
transporting, tilting or storing the
outboard motor.
Clamp Screws
Use the clamp screws to secure the
stern brackets to the transom.
Fuel Inlet Cap and Fuel Inlet
(BF5D and BF6A)
Remove the fuel inlet cap and
connect the fuel line connector to the
fuel inlet when using the portable fuel
tank.
Always install the fuel inlet cap if the
fuel line connector is not connected.
Be sure the fuel inlet cap is securely
installed.
FUEL FILLER CAP
VENT KNOB
FUEL
FILLER CAP
CLOSE
OPEN
CLAMP SCREWS
FUEL INLET
FUEL INLET CAP
32ZVC6000.book Page 23 Thursday, April 28, 2016 10:51 AM