82
MAINTENANCE
Lubrication
Wipe the outside of the engine with a cloth dipped in clean
oil. Apply marine anticorrosion grease to the following
parts:
Lubrication interval:
20 operating hours or a month after the date of purchase
for initial lubrication, then every 100 operating hours or
6 months.
Apply anticorrosion oil to pivot surfaces where grease
cannot penetrate.
CLAMP SCREWS
TILT LINKAGE
SWIVEL CASE
HANDLE PIVOT
PROPELLER SHAFT
TILT LEVER/REVERSE
LOCK LEVER
SHIFT SHAFT
32ZVC6000.book Page 82 Thursday, April 28, 2016 10:51 AM
To Next Page
Loading...
