25
5. INSTALLATION
Improperly installed outboard
motor can result in the outboard
motor dropped into the water, boat
not able to cruise straight ahead,
engine speed not increase, and
much fuel consumption.
We recommend that the outboard
motor be installed by an authorized
Honda outboard motor dealer.
Consult the authorized Honda dealer
in your area for the Y-OP (User
Optional Parts)/equipments
installation and operation.
Applicable Boat
Select the boat suitable for the engine
power.
Engine power:
BF4A: 2.9 kW (4 PS)
BF5D: 3.68 kW (5 PS) for U type
3.7 kW (5 PS) for D type
BF6A: 4.4 kW (6 PS)
Power recommendation is indicated
on most of the boats.
Do not exceed the boat
manufacturer’s power
recommendation. Damage and
injury may result.
Transom Height
Select the outboard motor which is
correct for the boat transom height of
your boat.
Location
Install the outboard motor at the
stern, at the center line of the boat.
Type: T (Outboard Motor
Transom Height)
S: 434 mm (17.1 in)
L: 561 mm (22.1 in)
32ZVC6000.book Page 25 Thursday, April 28, 2016 10:51 AM
To Next Page
Loading...
