73
MAINTENANCE
(2) These items should be serviced by an authorized Honda Marine dealer, unless you have the proper tools and are mechanically proficient. Refer
to the Honda Shop Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(4) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
(5) Check the fuel line for leaks, cracks or damage. If it is leaking, cracked or damaged, take it to your servicing dealer for replacement before
using your outboard motor.
(6) Check the fuel line for leaks, cracks or damage. Replace the fuel line if there are signs of leaks, cracks or damage.
(7) Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
Each use After use
First month
or
20 hrs.
Every 6 months
or
100 hrs.
Every year
or
200 hrs.
Refer to page
Fuel filter Check o83
Replace o83
Fuel line Check o (5) 38, 41
Replace Every 2 years (If necessary) (2) (6) -
Bolts and Nuts Check-tightness o (2) o (2) -
Breather tube Check o (2) -
Cooling water passages Clean o (4) 68, 69
Water pump Check o (2) -
Emergency stop switch Check o 18, 19
Engine oil leak Check o -
Each operation part Check o -
Engine condition (7) Check o -
REGULAR SERVICE PERIOD (3)
Perform at every indicated month
or operating hour interval,
whichever comes first.
ITEM
32ZVC6000.book Page 73 Thursday, April 28, 2016 10:51 AM
To Next Page
Loading...
