Honda CB360 - Engine Oil and Viscosity

Engine Ой Recommendation
Use only high detergent, premium quality
motor oil certified to meet or exceed US
automobile manufacturer's requirements
for Service Classification SE.
Motor oils intended for Service SE will
show this designation on the container.
The regular use of special oil additives is
unnecessary and will only increase operat-
ing expenses.
Engine oil should be changed at the
intervals prescribed in the Maintenance
Schedule on page 31.
NOTE:
Engine oil is a major factor affecting the
performance and service life of the en-
gine. Non-detergent and low quality oils
are specifically not recommended.
22
Viscosity:
Viscosity selection should be based on
the average atmospheric temperature in
your riding area. Change to the proper
viscosity oil whenever the changes in
average atmospheric temperature require
it.
Recommended oil viscosity:
General, all temperatures
SAE 10W-30 ог SAE 10W-40
Alternate:
Above 50°F вава — |
32° to 59°Е SAE 20 ог 20W
Below 32°Е