Honda CRF450X 2010 User Manual

I..
FUEL SYSTEM
INSTALLATION
Install the removed parts in the reverse order of removal.
~)
~
_ : ApplV Honda Bond A or '- "~/'---_- __ ~J
Honda HandgripCement
or e quivalent
Route the wires Install the air cleaner housing , collars and bolts .
and hoses properly
('05 - '07: page ,.
25, Aha! '07. page
'-32) . Be C8reful not
Tighten the rear fender mounting boilS to the speci-
fied torque.
TORQUE: 13 N'm (1.3
k gf ·m, 10 Ibf.ft)
to damage the
WIres /Jnd hoses . Install the mud guard and t ighten the screws
securely _
Install the collar and bolt .
Tighten the bolt securely.
AIR CLEANI'R HOUSING
MUD GUARD
AIR CLEANER ElEMENT
ELEMENT HOLDER
AIR CLE.'NE
6-9

Honda CRF450X 2010 Specifications

General

Engine Type	449cc liquid-cooled single-cylinder four-stroke
Bore and Stroke	96mm x 62.1mm
Compression Ratio	12.0:1
Transmission	Wide-ratio five-speed
Final Drive	#520 chain; 13T/51T
Front Suspension	47mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability; 12.4 inches travel
Front Brake	Single 240mm disc with twin-piston caliper
Rear Brake	Single 240mm disc
Front Tire	80/100-21
Rear Tire	110/100-18
Wheelbase	58.3 inches
Fuel Capacity	1.9 gallons
Ignition	Solid-state CD with electronic advance
Rear Suspension	Pro-Link Showa single shock with spring preload, 17-position rebound damping adjustability, and 13-position compression damping adjustability; 12.4 inches travel
Rake	27.38 degrees