Honda REFLEX - Engine Idle Speed

LEFT SIDE
(1) clip (2) maintenance lid
(1)
(2)
114
Idle Speed Adjustment
Engine Idle Speed
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Remember, idle speed adjustment is not a
‘‘cure-all’’ for other problems in your
engine’s fuel-delivery system. Adjusting
the idle will not compensate for a fault
elsewhere.
The engine must be at normal operating
temperature for accurate idle speed
adjustment.
For information about high altitude
carburetor adjustment, see page .
The best way to assure proper carburetion
is to see your Honda dealer for regularly
scheduled servicing, including carburetor
adjustment.
If the engine is cold, start it and warm it
up with ten minutes of stop-and-go
riding. Stop the engine.
Place your scooter on its center stand on
a firm, level surface.
Remove the clip ( ) and maintenance
lid ( ).
1.
2.
72
3. 1
2
190
04/10/19 10:52:44 31KSZ610_123