21
OPERATION
6. If the choke lever was moved to the CLOSED position to start the engine,
gradually move it to the OPEN position as the engine warms up.
SETTING ENGINE SPEED
After starting the engine, move the throttle lever to the FAST position for self-
priming, and check pump output.
Pump output is controlled by adjusting engine speed. Moving the throttle lever
in the FAST direction will increase pump output, and moving the throttle lever
in the SLOW direction will decrease pump output.
31YG06130.book 21 ページ ２０２１年１月２０日 水曜日 午前９時２７分
To Next Page
Loading...
