46
STORAGE
4. After all fuel has drained into the container, tighten the carburetor drain bolt
securely.
5. Reinstall a new O-ring and sediment cup.
6. Move the fuel valve lever to the OFF position.
Engine Oil
Change the engine oil (see page 30).
Engine Cylinder
1. Remove the spark plug (see page 36).
2. Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
3. Pull the starter grip several times to distribute the oil in the cylinder.
4. Reinstall the spark plug.
5. Pull the starter grip slowly until resistance is felt. This will close the valves so
moisture cannot enter the engine cylinder. Return the starter grip gently.
31YG06130.book 46 ページ ２０２１年１月２０日 水曜日 午前９時２７分
To Next Page
Loading...
