Operating & Maintenance Instructions 9
__________________________________________________________________________
© Honeywell - M450 001 1D - 23.05.2019
5. INTRODUCTION
This Manual covers the features of the AS302P SMETS2 product. The SMETS2 meter is designed specifically for the UK
market and conforms to all DECC published requirements (GBCS V1.1, SMETS2 v2.0).
The AS302P is a Multi-tariff Residential Smart Meter that can be programmed by the Supplier to operate as a Credit or
Prepayment Meter.
The meter offers connection to a Modular Communications Hub that conforms to the ICHI Specification. This Module can
be exchanged without removing power to the meter. The meter offers ZigBee Communications for tunnelling information
to the Comms Hub and to provide Customer Information for use with Type 1 or Type 2 Devices.
The meter provides extensive security features, in line with CPA Requirements.
The meter contains a contactor, thus allowing the meter to be used in Prepayment Mode, Load Limiting functionality and
also allows Disconnection of Supply if premises are not occupied.
The display sequence is supported by two modes of operation, Scroll Mode and through a Menu System Mode with
English Text Descriptors.
The Application Firmware can be downloaded to the meter, ensuring a future proof solution, without affecting the
metrological code.
The meters are approved to:
EU Directive 2014/32/EU (MID) - EN 50470-1, EN 50470-3 Class A or Class B
IEC 62053-23 for kvarh accuracy Class 2 or Class 3
2014/53/EU - The “Radio Equipment” Directive (“RED”)
CPA Security Characteristic - Electricity Smart Metering Equipment – V1.2, November 2015
The meter has an Ingress Protection Rating of IP53 to IEC 60529
To Next Page
Loading...
Need help?
General
