To Next Page

To Previous Page

20 AS302P Single Phase Smart Meter

____________________________________________________________________

12. BILLING DATA

The meter stores several different sets of data under the description of Billing Data according to the SMETS2 / GBCS

Definition.

12.1.1. Periodic/Calendar Billing Data Log

There are 12 entries in the Billing Data Log, these are captured with a UTC Date and Time Stamp.

The meter is configured with a Capture Date, which includes Wild Cards i.e. the Billing will happen at the same Time and

Date every month (period).

The Capture Date can be set to Zero in which case no Automatic Billing will occur. If a Single Date is set i.e. No Wild

Cards then once the capture has been completed the date will be removed from the meter as it will be stored with the

billing Set. (Capture Date is set to zero, therefore no Automatic Billing will occur).

The following Billing Data is available in the Billing Data Log:

Credit Mode

• Tariff TOU Registers

• Tariff TOU Block Registers

• Active Import Register

Prepayment Mode

• Credit Information above

• Meter Balance

• Emergency Credit Balance

• Accumulated Debt

• Remaining Payment Debt

• Remaining Time Debt 1 and 2

An Alert is sent via the HAN Interface containing the most recent entries in the Billing Data.

The Meter Balance is immediately reset, if the mode is changed.

12.1.2. Change of Mode / Tariff Billing Data Log

A set of Billing Data will be recorder when:

• The meter changes from Prepayment to Credit Mode or vice versa

• The meter changes Tariff/Price Structure

There are 12 entries in the Billing Data Log that are captured with a UTC Date and Time Stamp. The following Billing Data

is available in the Billing Data Log, (a single log which covers Credit & Prepayment info):