Honeywell AS302P - Page 78

74 AS302P Single Phase Smart Meter
____________________________________________________________________
© Honeywell - M450 001 1D - 23.05.2019
Power Event Log (Contd)
Event / Alert Code Meaning
Event / Alert
Code
Mandated /
Non-mandated
Alert
WAN
(Alert Type)
Alert
HAN
Incorrect phase sequencing
0x81B7
Non-mandated
Y (1)
N
Over Current
0x8010
Non-mandated
Y (1)
N
Power Factor Threshold Below
0x8014
Non-mandated
Y (1)
N
Power Factor Threshold Ok
0x8015
Non-mandated
Y (1)
N
Reverse Current
0x81BB
Non-mandated
Y (1)
N
ALCS Event Log
Event / Alert Code Meaning
Event / Alert
Code
Mandated /
Non-mandated
Alert
WAN
(Alert Type)
Alert
HAN
Failure of Ad hoc Change to HAN connected
Auxiliary Load Control switch
0x811A
Mandated
N
N
Failure of Calendar Based Change to HAN
connected Auxiliary Load Control switch
0x811B
Mandated
N
N
Successful Ad hoc Change to HAN connected
Auxiliary Load Control switch
0x8131
Mandated
N
N
• Alert type 1 - Payload comprises Alert Code and Timestamp only
• Alert type 2 - Payload comprises Alert Code, Timestamp and Use Case specific data as defined in GBCS