Press these keys to:
Begin the current day or time programming
Set the day of the week, select the program day during
programming, and bypass a day while copying.
Select the time period to program, review or cancel
Cancel the day and time period shown on the display,
(ex,cept
MORNING) as well,as both the heating and
cooling temperatures.
Switch between heat and cool modes during
programming or when reviewing the program.
Set the time ahead and back. Hold either key down to
change the setting faster.
Set the temperature while programming and temporarily
change the temperature during operation. Hold either
key down to change the setting faster.
39
Select one day’s program to copy to another day
Select a day to copy a program to
Hold any temperature you desire for an extended
period.
Chrmi,e
the temperature to the set point of the previous
Maintain the current temperature through the next
program period.
Start your programmed schedule, cancel temporary
program changes, and cancel Hold Temp.
See the current temperature setting. Setting may not
match programmed setting during recovery from
energy savings.
To Next Page
Loading...
