Honeywell Code Encryptor II User Manual

Specifications
RECEIVER
• 12VDC Power Input
• Channels 1 Data outputs
• Channel 2 Relay N/O, Comm (10amp)
• Channel 3 selectable: Form C Relay (N/O, N/C, Comm) 5amp
This output can be reconfigured from a pulsed output to a latching, 75 second
timed or 150 second timed output.
• Channel 3 - Keypad panic data output (Programmable On or OFF)
Frequency 303Mhz
Stand by Power Consumption 15ma
Temperature Range -5°F to 160°F (Indoor use only)
REMOTE CONTROL
Battery 12VDC Mini (Part #GP23A) Replace battery at least once a year.
Range 150+ feet
CHANNEL 3 OUTPUT
Both jumpers in (default) Momentary output
Jumper closest to the harness removed Latching (on/off) output
Jumper farthest from the harness removed 75sec timed output
Both jumpers out 150sec timed output
STREET SMART SECURITY TECHNICAL CAN BE REACHED
12925 BrookPrinter Place, Suite 410, Poway, CA 92064
M-F 7AM-5PM PST AT (888) 768-2846 OR (619) 513-9352-FAX
19

Honeywell Code Encryptor II Specifications

Power

receiver power input	12VDC
stand by power consumption	15ma

Operating Environment

temperature range	-5°F to 160°F
range	150+ feet
frequency	303Mhz

Remote Control

battery	12VDC Mini (Part #GP23A)
battery replacement frequency	once a year