Honeywell ComfortNET CTK04

CTK04 ComfortNet™ Communicating Thermostat
13
I/O-CHTSTAT03 69-2688—11
ComfortNet User Menu
Press MENU > COMFORTNET USER MENU
Press MENU and scroll down to press COMFORTNET USER MENU. Enter the date code
(password) when prompted. The date code is printed on the back of the thermostat;
or press MENU > EQUIPMENT STATUS to find the date code.
Each piece of equipment is divided into categories which may include: (Not all
menu options listed here may be available. Additional menu options may be dis-
played on the thermostat.)
• Diagnostics: Provides a fault history of the equipment and allows the
installer to clear the fault history.
• Identification: Provides the model and serial number of the equipment and
software revision information.
• Sensors: Provides the sensor data of the equipment. In some instances, it
4130 Entry/Exit Remote -
Away/Unoccupied Heat Setpoint B
4140 Entry/Exit Remote -
Vacation/Holiday Cool Setpoint B
4140 Entry/Exit Remote -
Vacation/Holiday Heat Setpoint B
5040 Indoor Sensors Used for Temperature Control B
7000 Filter Type B
7020 Number of Air Filters B
7110 Air Filter Replacement Reminder B
7110 Air Filter 2 Replacement Reminder B
7120 EAC Cell Cleaning Reminder B
7120 EAC Pre-Filter Cleaning Reminder B
7120 EAC Post-Filter Replacement Reminder B
8000 Humidifier Type B
8010 Indoor Sensor Used for Humidification Control B
8050 Humidification - Window Protection B
8060 System Modes Allowing Humidification B
8070 Humidification Control B
8100 Clean Tank / Water Filter Replacement Reminder B
8100 Humidifier Pad Replacement Reminder B
9000 Dehumidification Equipment B
9010 Indoor Sensor Used for Dehumidification Control B
9020 Humidity Sensor Displayed on the Home Screen B
9070 Dehumidification - Overcooling Limit R
9080 Dehumidification Control C
9090 Dehumidification Minimum On Time C
9100 High Humidity Comfort Reset Setting C
9180 Dehumidification Away Mode B
9190 Dehumidification Away Mode - Fan Control B
9200 Dehumidification Away Mode -
Low Limit Temperature B
9200 Dehumidification Away Mode -
Temperature Setting B
9200 Dehumidification Away Mode -
Dehumidification Setting B
9210 Dehumidifier Filter Replacement Reminder B
10000 Ventilation Type B
10050 Ventilation Control Method B
10090 Number of Bedrooms R
10090 Size of House R
10100 Enter Equipment Ventilation Rate R
10120 Ventilation Percent On Time B
10170 Ventilator Filter Cleaning Reminder B
11000 Number of UV Devices B
11050 UV Bulb Replacement Reminder B
11050 UV Bulb 2 Replacement Reminder B
12000 Installer Custom Reminders B
14000 Clock Format B
14010 Daylight Saving Time B
14020 Indoor Temperature Display Offset B
14020 Indoor Humidity Display Offset B
15000-15020 Dealer name, phone, email, website, message B
Installer options (ISU)
6
ISU Function ISU Function
may allow the installer to setup or turn off a sensor.
• Setup: Allows the installer to change the settings of the equipment.
• Status: Provides the current status of the equipment.
See equipment installer manual for specific submenu options available within
each category.