EasyManuals Logo

Honeywell CT50 User Manual

Honeywell CT50
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
DRAFT
Chapter 6 — Configure the Computer
Dolphin CT50 Mobile Computer User Guide 63
4 Tap Ethernet. The Ethernet list shows the name of the current
Ethernet connection. By default, the computer assumes a DHCP
connection, and that your network has assigned an IP address
automatically. If DHCP is working, the Ethernet dock should indicate
that communication with the network is occurring.
5
(Optional) To assign a static IP address, tap the connection
name
(for example, eth0). The IP settings dialog box appears.
a Tap DHCP and then select Static from the list.
b Enter the required network information and then tap Apply.
How to Connect to Virtual Private Networks
The computer supports connecting to virtual private networks (VPNs).
This section describes how to add and connect to VPNs. To configure
VPN access, you must obtain details from your network administrator.
You view and change VPN settings in the Settings app.
Add a VPN
Before you can connect to a VPN, you must add VPN information.
1 Start the Settings app.
2 In the Wireless & Networks section, tap More.
3 Tap VPN.
4 Tap Add VPN Profile.
5 Enter information for the VPN.
6 Tap Save. The VPN name appears in the VPN list.
Connect to a VPN
1 Start the Settings app.
2 In the Wireless & Networks section, tap More.
3 Tap VPN.
4 Tap the name of the VPN in the list, and enter any necessary
credentials when prompted.
5
Tap Connect. The computer connects to the VPN, and a
Status
icon and notification appear.
To disconnect from the VPN, tap the notification.
Note: Before you can access VPNs, you need to set a lock screen PIN or
password.

Table of Contents

Other manuals for Honeywell CT50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell CT50 and is the answer not in the manual?

Honeywell CT50 Specifications

General IconGeneral
Display diagonal4.7 \
Display resolution1280 x 720 pixels
Flash memory16 GB
Internal memory0.002 GB
Internal memory type-
Compatible memory cardsMicroSDHC, SDIO
Maximum memory card size32 GB
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Battery capacity4040 mAh
Battery life (max)12 h
Processor familyQualcomm
Processor frequency2.26 GHz
GPS receiverGNSS
Bundled softwareHoneywell Powertools and Demos
Operating system installedWindows Embedded 8.1
Product colorBlack, Grey
International Protection (IP) codeIP67
Data network2G, 3G, EDGE, GPRS, GSM, HSPA+, LTE, UMTS
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version4.0
Security algorithmsEAP, WEP, WPA, WPA2
Rear camera resolution (numeric)8 MP
Speakersstereo
Weight and Dimensions IconWeight and Dimensions
Depth160 mm
Width82.5 mm
Height19 mm
Weight342 g

Related product manuals