Chapter 9. MEMORY CARD OPERATIONS
■ Procedures for loading all programs
This procedure loads all programs on the memory card in the DCP551. The file numbers
used on the memory card are converted to file numbers used in the DCP551.
When the “
Overwrite
” load function is selected, programs in the DCP551 that have
the same number as those on the card are overwritten by the card programs.
When the “
Skip
” load function is selected, programs in the DCP551 that have the same
number as those on the card are left as they are and the next number is selected for pro-
cessing.
■ Procedures for loading setup data
This procedure loads setup data on the memory card onto the DCP551.
■ Procedures for loading variable parameters
This procedure loads variable parameters on the memory card onto the DCP551.
■ Procedures for loading PID parameters
This procedure loads PID parameters and constant value control data on the memory
card onto the DCP551.
To Next Page
Loading...
Need help?
General
