Dolphin CT60 Mobile Computer 7
Battery Replacement
If your battery power is low, you need to either charge the battery in the computer
or replace it with a charged battery.
Before Attempting to Remove the Battery
Before removing the battery, always do one of the following:
• Power off the computer.
• Place the unit in Swap Battery mode. Swap Battery mode places the computer in
a low power state so that the battery can be removed for a short time.
Swap Battery Mode
Swap Battery mode places the computer in a lower power state so that the battery
can be removed for a short time. This feature in not available on all models.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Warning: If you have a CT60 model certified for use in hazardous
locations, read Important Information on page 5.
To Next Page
Loading...
