Dolphin CT60 Mobile Computer 37
1. Open the Default profile.
2. Tap in the upper right corner of any of the scan settings screens for the
profile.
3. Tap Restore all defaults.
Default Scan Settings
Use the following sections to understand the scan settings available for scanner
profiles. To learn how to create a new profile, see page 42.
Data Processing Settings
Use the Data Processing Settings to specify how bar code data is processed by the
computer.
Data Processing Settings
Setting Description Default
Wedge Enable or disable the scan wedge feature. Enabled
Wedge Method Select Standard when character messages have to use a
delay in between bar codes or Keyboard when a simulated
key press is needed.
Standard
Charset Select the character set to use when interpreting the bar
code data into a string.
ISO-8859-1
Prefix Defines the string added before the decoded bar code
data.
Substitutions occur within the Prefix string values.
None
Suffix Defines the string added after the decoded bar code data.
Substitutions occur within the Suffix string values.
None
Wedge as Keys List of character values to wedge as keys, represented as a
comma-separated list of decimal values.
9,10, 13
Substring Replacement Character Code
\r 13
\n 10
\t 9
\\ ‘\’
Substring Replacement Character Code
\r 13
\n 10
\t 9
\\ ‘\’
To Next Page
Loading...
