Dolphin CT60 Mobile Computer 27
About Status Bar Icons
Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Remap a Button
You can change the default function of the Left Scan, Right Scan, or Camera
buttons as well as the Back, Recent, Home, and Search virtual buttons.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key Remap.
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual buttons.
5. Tap OK.
6. Select one of the following options:
• Tap Keys to view available functions. Select the function you want assigned
to the button.
• Tap Apps to view available applications. Select the application you want
assigned to the button.
• Tap Actions to enter an Intent or Broadcast. Tap OK to assign the action to
the button. For example, to send a Broadcast,
Icon Description Icon Description
Pending alarm and Alarm is set Vibrate mode is turned on
New text message or multimedia
message
Airplane mode is turned on.
Error with text or multimedia message
delivery
Bluetooth is turned on.
New email SD card is full
Computer is connected to a PC with a
USB cable
Wi-Fi network connected with full
signal strength
Synchronizing data Wi-Fi network connected but no signal
strength
Error with sync or sign-in Phone connected with full amount of
bars.
Computer is connected with Ethernet Phone connected with full amount of
bars but no Internet connection.
To Next Page
Loading...
